Custom Design

Our Unit2go tiny homes and transportable cabins are carefully delivered using our own specialist transport team and our own truck and trailer.

We then use our digger to easily manoeuvre the cabin into those tight areas that the truck can’t reach. There is usually no site prep needed if the site is reasonably flat. (If the unit is over 10m long we will need to organise a larger digger onsite to manoeuvre it into place). If the site is uneven or sloped you may need to pay for a digger to level the site prior to delivery.

We set up homes and cabins on properties all over the North island, whether on blocks or piles. We make it happen for all kinds of different Kiwis on different sections; from suburban sleepouts and rural tiny house communities, to baches at the beach.

POWER: All our tiny homes have an electrical compliance certificate. All units come with a 15 metre 16 Amp caravan electrical lead for connection to your existing power source. We recommend you install an external caravan power point at your source.

WATER: Also standard in all our tiny houses/cabins is an exterior water inlet that can be connected with a standard garden hose, from your existing onsite water supply.

WASTEWATER: There are 2 options with Wastewater.

Option 1: Installation of a Saniflo pump. This means that waste can be pumped down a 25mm pipe up to 40ms from the unit, it can also pump uphill 5 metres. There is an extra cost involved for the pump.

Option 2: The toilet outlet can be plumbed in as per your normal house system. This would need to be carried out by a qualified drain layer. The waste will then go into your existing sewer drain or septic tank.

You can choose a standard Unit2go floor plan and make some changes to it to suit your personal needs, or we can custom design according to your requirements. A Unit2go tiny house can be as large as you need – you can always join two units together for a pavilion style home. Please contact our sales team on sales@unit2go.co.nz to discuss your requirements.

We can also build specialist commercial units. We have built many different types of units including; bunkrooms, ablution blocks, mobile bar, mobile cafe, portable stables, offices, etc. The possibilities are endless.

We offer finance options against the unit, so you buy the tiny home initially and take on a loan against this at the same time. You then pay us weekly until the loan is paid off. Our sister company, UFinance will provide the finance assuming you are eligible. To start the process, complete our online application form. At the time of submitting your application, you will also need to provide us with photo ID and proof of address, plus you will need landowner approval for where the unit is going to be located.

Please click on the link to view a draft copy of our Credit Contract Unit2go Credit Contracts.

The Finance rate ranges vary, please read about our rates and fees here.

Generally, Unit2Rent does not require a bond for its rental units, however, it does require 2 weeks rent payment up front.  The delivery and pick up fee is required to be prepaid prior to delivery. Minimum rental term is 12 months. Click here for more info.

For a simple delivery, costs start from $750 for 2.4m wide sleepout close to our factory and delivery fees increase from there. Larger units are quoted individually due to extra costs involved for over-dimension pilots etc. Our Premium Series has stricter delivery requirements.

Each cabin is built in accordance with the building code and comes with a council code of compliance. However, you may need a resource consent or building permit for your specific location. If you are unsure about consent or permits then please contact your local council for more information.